Benefits

• Ready-to-use
• Quick, sweep-in application
• Weed Resistant
• Frost Resistant
• Non-polymer 100% Natural Raw Materials
• Non-Hazardous
• Non-Staining
• Water Permeable
• Certified Environmentally Friendly

• Coverage

  Each bag of Joint-It Fine will cover approximately 10m² of brick/block paving where the joints are less than 3mm wide.

• Precautions For Use

  Always test a small hidden portion of the surface before use to ensure appearance and performance is acceptable. Suitable for lightly loaded surfaces (up to 3.5 tonnes).
  
  Joint-It Fine should be applied in dry weather conditions at temperatures above 2°C.
  
  Joint-It Fine should only be used with block/brick paving laid on a water-permeable base with joints under 3mm wide.

• Application Instructions

  Sweep sand into clean and dry joints.
  
  Compact sand into joints using a vibrator / whacker plate.
  
  Use a leaf blower to remove excess sand from the top of the surface.
  
  Wet paving with a light, fine spray and wait 5-10 minutes. Then thoroughly soak the paving.

• Surface Preparation

  Ensure that surface is clean and dry before opening the bag.
  
  You will need a compactor/wacker plate and a leaf blower to complete the application of

• Joint-It® Fine.

Storage

Store product, including open bags, in a dry place. Product does not cure/harden on contact with air. Product will be adversely affected by storage in damp conditions.